Reconyx Hyperfire Instrukcja Obsługi Pobierz pdf (Strona 26)

25 ©RECONYX, Inc.

Troubleshooting

For answers to questions about your RECONYX™ HyperFire™ camera that you

cannot find in this Instruction Manual, please check the RECONYX™ web site

(www.reconyx.com).

Firmware Updates

You should also periodically check the RECONYX™ web site for firmware

updates for your camera. We periodically release firmware updates with new

features and/or performance enhancements. Updating firmware on the

HyperFire Series cameras takes just a few seconds, and is well worth the effort

to ensure your camera is performing at the highest level possible.

Limited Nighttime Range

If your nighttime range is less than expected, check to be sure your batteries are

new or fully charged. You can also change your camera’s night mode image

setting to Max Range. Our specified night range values are based on the Max

Range setting. If using Max Range doesn’t resolve the problem, then try running

either NiMH rechargeable batteries or Energizer® 1.5V AA Ultimate Lithium™

batteries. Alkaline batteries cannot deliver enough amperage to power the

illuminator consistently at night.

The physical camera setup is also important in getting good nighttime images. If

you aim the camera out over an open field where there is nothing within range to

reflect the Infrared energy back toward the camera, the images will appear very

dark (like shining a flashlight into outer space). The best nighttime images will be

captured when you have a backdrop of some sort that will reflect energy back

toward the camera (e.g. trees, tall grass, fence, building, hillside, etc).

Focus Problems

If your images appear cloudy or out of focus, first consider whether there was

snow or frost on the camera windows; you may wish to check your camera after

a fresh snowfall to be sure the windows are not covered with snow. Next, check

the windows for dirt and water spots, and gently clean them with a clean soft

cloth and glass cleaner or water. Image clarity can also be adversely affected by

very high temperatures, so it is a good idea to mount your camera where it will

not be getting direct sunlight during the heat of the day.

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 32

Brak uwag

Reconyx Hyperfire Instrukcja Obsługi Strona 26